Mounting covers and air filters
![](../Images/png/324821003__Web.png)
1 | Designer cover |
2 | Retaining spring |
3 | Air filter |
4 | Cover |
5 | Internal shutter with slider |
6 | Housing |
6.1 | Housing locking hook |
- Press the cover evenly onto the housing so that the cover snaps into place at the bottom of the housing locking hook. Make sure that the slider of the internal shutter does not jam.
- Insert the air filter into the round housing recess and secure it with the retaining spring on two receptacles of the cover. To do this, pull the retaining spring apart slightly at the ends and slide it over the receptacles.
- Fit designer cover. The 4 pins of the design cover must engage easily in the receptacles of the cover.