Installation

  1. Before the installation, install the wall sleeve (WH 100, WH 120 or WH 150) which matches the AP shutter/the SG external grille in the exterior wall.
  2. Affix the supplied sealing strip all the way round the housing connections of the shutter/external grille.
  3. Loosen the housing at the 4 locking tabs and remove it from the holder.
  4. Mark the 4 drilling positions of the mounting holes on the exterior wall, drill and insert dowels.
  5. Push the AP shutters/SG external grilles with the flange into the wall sleeve and screw to the wall with 4 screws. Ensure the correct position of the sealing strip. Note the installation position: with Maico lettering on the bottom right.
  6. If necessary, insert optional FG fly screen into the shutter/the external grille.
  7. Press the housing unit onto the receptacle so that it audibly engages in the 4 locking tabs.
  8. Seal the AP shutters/the SG external grille to the wall in a manner that is permanently elastic and weatherproof. Suitable sealing material (silicon) is to be provided by the customer.
  9. Function test of AP variant: Check ease of movement of the lamellae.