Installation

1

Lamellae opening angle setting screw

  1. Unpack the AZV 100 and remove the setting screw from the rear panel.
  2. Remove the design cover with the housing cover. To release, unlock the locking lever (arrow).
  3. Stick the enclosed sealing strip all round the housing connection (to prevent air from infiltrating).
  4. Insert the housing into the wall breakthrough/wall sleeve. Observe the housing position "TOP".
  6. Align the housing horizontally and screw tight at both holes (arrows).
  7. Fit the covers and lock them with the locking lever.

The air filter is already inserted at the factory and fixed in place with the retaining spring.