Installing the cover
15 | Cover with central screw [15.1] |
16 | Regulating plate for second room connection |
17 | Filter mat, filter class G2 |
Installation information
- Cover can be turned up to ± 5° (to provide compensation if housing is inserted at too much of an angle). If installing on a wall, ensure that the Maico name is in the bottom right.
- If the housing edge is flush with the plaster, use central screw, M6 x 16 mm, to secure the cover.
- With a plaster overshoot of up to 20 mm to the housing edge, use spacing frame DR 60/100 between the wall and cover. The customer should provide a longer screw (M6 fillister head) to secure the cover.
- If the housing is plastered in too deep, compensate for this with a two-part wall frame ER-MR (can be adjusted between 50...100 mm). This prevents air from being drawn in from the shaft. Use the supplied screw to fix the cover.
- Fold up cover at the recessed grip, place on the housing and secure with the central screw.
- If necessary, first fit a spacing or wall frame.
- With second room extraction, insert regulating plate below locking tabs at the side on the intake grille of the cover, insert filter mat.
- Lock cover. The lock must engage audibly.
- Switch on mains fuse, remove warning sign.
- Undertake initial commissioning and function test.
- Affix time strip (supplied with the cover) and push the activation button [A] all the way. Installation location of time strip, e.g. near the cover.