Cleaning

Cleaning and maintenance may only be undertaken by qualified personnel and under observation of the enclosed safety instructions.

Cleaning and maintenance intervals should be determined by the operating company. Frequency and measures depend on the operating conditions.

  1. Disconnect the fan from the mains and secure the mains fuse with a padlock against reconnection.
  2. Wait until the fan has cooled down sufficiently and the impeller is stationary before removing the weather protection hood or any other protection against accidental contact or touching the fan.
  3. Lock the impeller so that it cannot move any more. This protects you from unforeseen rotary movements, such as those which may be caused by air flows in the ventilation channel.
  1. Clean the impeller, remove layers of dirt, dust and grease.
    A clean impeller is very important and prevents imbalances, which may result in hazardous situations and damage the fan. If impellers have curved blades, material may be deposited on the backs of the blades when conveying materials which are electrostatically charged or contain resin or adhesive. Clean the impeller carefully. Residue accumulating at certain points will cause imbalances sooner than an even layer of dirt will.
    Replace the impeller if it is too dirty or if it has coatings which are causing imbalance.
  1. When air is drawn in, frictional/grinding dusts or corrosive air may wear the impeller and cause vibrations. Clean the impeller as previously described. If the impeller is heavily worn, replace it with a genuine spare part.
  1. Clean the inner parts of the fan and remove all contamination.
  2. Clean the motor regularly with a cloth. Remove all layers of dust and dirt to prevent a fire hazard.
  3. Clean the fan’s intake opening and protective grille, if installed, to prevent blockages and overheating.
  4. Refit any components you may previously have removed. Ensure that the protective grille is positioned correctly.
  5. Before restarting make sure that there are not any tools or other foreign objects inside the fan. Never operate the fan without its protective grille (→ Unit overview) and protection against accidental contact at the inlet.
  6. Remove the impeller lock.
  7. Switch on the mains fuse.
  8. Run a function test.