Deleting transmitters

Deleting an individual transmitter

If there is a transmitter that is faulty or that can no longer be identified, it is possible that all transmitters must be deleted. System components then have to be taught-in again. (This is recommended if a transmitter was lost or is faulty.)

  1. In order to delete the required transmitter, the transmitter teach-in process (RLS RC, radio switch or window contact) has to be repeated→ previous chapter.

Deleting all transmitters

  1. Activate teach-in mode on the master fan (receiver).
  2. The LED flashes, teach-in mode is activated.
  3. Press the teach-in button briefly twice.
  4. LED flashes briefly twice and then goes out.
  5. Press the teach-in button on the slave fan (transmitter) for > 1 second until the LED on the fan lights up briefly once.
  6. All taught-in transmitters are deleted. The fan is again in its initial state.