Setting up the fan as a signal amplifier (Repeater)
The radio electronics in the fan can also be used as a signal amplifier. In this case, the fan that is set up this way works additionally as a signal amplifier. EnOcean telegrams are received and forwarded in parallel to the running application. This can be necessary for example, with applications in single-family homes that are completely automated with EnOcean products.
Settings values
- Off
- Level 1 = Original telegrams are amplified
- Level 2 = Original telegrams and telegrams that have already been amplified are amplified
Setting up the fan as a signal amplifier
- Activate teach-in mode on the receiver (fan).
- The LED flashes, teach-in mode is activated.
- Press the teach-in button briefly three times.
- The LED lights up briefly and then flashes briefly three times.
- Press the teach-in button x times for repeater mode:
- Repeater off: Push 1 time – LED flashes 1 time
Repeater Level 1: Push 2 times – LED flashes 2 times
Repeater Level 2: Push 3 times – LED flashes 3 times - Press the teach-in button (≥ 5 seconds) until the LED on the fan lights up once for approx. 1 second.
- The setting is saved.