Installation

  1. Transport the fan to the installation site using a crane or suitable lifting gear and place it in the opening Transport, storage.
  2. Mark and drill fixing holes (3 or 4 depending on type) and insert dowels.
  3. Screw fan onto square wall plate or steel wall ring on the wall, ceiling or bracket (tightening torque of 20 Nm).
  4. Lay the power cable (if necessary with empty duct) and fasten to the protective grille with cable ties.
  5. With free inlet (if impeller accessible) additional protective grille (e.g. Maico protective grille SG) as protection against accidental contact and drawing in.