Commissioning

Basic settings on the room air control are undertaken in service mode. If connected to RLS 45 K, the commissioning software may also be used.

Switch on ventilation system as follows:

  1. Ensure that all ventilation units and system components are connected to the room air controls.
  2. Remove warning sign from fuse box and switch on mains fuse. The ventilation units start up in ventilation level 2.
  3. Run function test.
  4. Set the desired parameter values in Service mode or using the commissioning software.

Basic settings can be made directly on the RLS 45 O or RLS 45 K room air control unit. To do this, select Service mode and set the desired parameter value. Additional information can be found in the online commissioning instructions (download at www.maico-ventilatoren.com). Here you can also download the commissioning software for the RLS 45 K control. This provides you with a wide range of setting parameters for individual system adjustments.