Changing parameters

In some menus, you can set the value of a parameter. This is indicated by the yellow LED flashing.

Fast flashing (2 times per second) means that the setting can be changed with the current access rights.

Slower flashing (1 time per second) means that changing the setting requires higher access rights.

To change a setting, first press [OK]. If higher access rights are required, a login menu appears. See below. If you have sufficient access rights, a cursor will appear next to the first value that you can change. To change the value, press [▲] or [▼].

For multi-digit numbers, you can move through the number using [◄] and [►].

Press [OK] when the desired value is displayed.

If other values can be set, the cursor automatically jumps to the next value.

If you want to skip a value without changing it, press [►].

To cancel a change and restore the existing value, press and hold the [C] button until the cursor disappears.

This is followed by a series of menus that display the operating mode, the selected functions, alarm events and the status of the inputs and outputs.