Manual / Auto

In this menu, the operating mode of all configured output signals and a range of control functions can be controlled manually.

The operating mode for the entire unit is set in the "Set operating mode" menu.

The output signal of the supply air controller can be set manually (Manual/Auto) to any value between 0 and 100 %. The temperature output signals change accordingly when they are in "Auto" mode. It is also possible to manually control each of the temperature output signals separately.

All configured digital outputs can be set to "Auto", "On" or "Off".

As manual control of one of the outputs affects normal control, an alarm is triggered as soon as an output is set to manual.

As the menus vary depending on the configuration of the outputs, only the most common ones are shown here. For the digital signals, you can normally choose between "Auto" and "On" and "Off" or similar terms that indicate the two possible manual states of the digital output.