Connecting the PC to the Powerbox

To make settings with the commissioning software, you need a suitable USB 2.0 cable with A and B connectors.

Connect the USB cable to the PC only after installing the commissioning software.

Read the supplementary sheet Safety instructions before opening the unit.

Risk of cuts if glass parts are damaged.

Glass parts of the front covers or the operating unit are fragile. Take care when installing/removing. Observe safety instructions.

  1. Unlock the design/glass cover with the locking levers and remove the cover. Secure the cover from falling down with one hand.
  2. Connect PC/notebook to ventilation unit at the USB port.
  3. After finishing the work, attach the design/glass cover. Make sure that the cover is correctly inserted and the locking lever is engaged.