1a | Access to the exhaust air filter |
1b | Access to the outside air filter and electrical terminal box |
2 | Unit cover
Function: To easily open and close the unit with a tool. Access to heat exchanger, condensate lift pump, condensate tank* and heat register. |
3 | RLS 1 WR control panel
Function: Control panel suited to the geniovent.x ventilation unit. On/Off, 4 levels, filter replacement and fault display. |
4 | External CO2 sensor (optional) or external VOC sensor (optional)
Function: CO2 sensor (optional): Sensor for registering carbon dioxide CO2. |
5 | Motion sensor (optional)
Function: for registering room occupancy. |
6 | Exhaust air filter, filter class ePM 10 60% (M5)
Function: Filters coarse dirt out of the exhaust air. |
7 | Electrical terminal box with control circuit board
Function: Central control unit of ventilation system. |
8 | Outgoing air fan
Function: Conveys the used air to the outside. |
9 | Bypass
Function: Used to bypass the heat exchanger. |
10 | Heat exchanger
Function: In the heat exchanger, heat is transferred between the exhaust air and supply air flows. |
11 | Outside air fan
Function: Conveys fresh air into the living area. |
12 | Outside air filter, filter class ePM1 55% (F7)
Function: Filters the finest contamination, e.g. pollen, out of the outside air. |
13 | Condensate tank*
Function: Condensate collects in the stainless steel condensate tank. |
14 | Condensate lift pump*
Function: Pumps the collected condensate out of the ventilation unit (hose in outgoing air socket). |
15 | Outside air, outgoing air shutters
Function: To close off the unit when stationary. |
16 | Connection cable
Function: Cable for external connections, e.g. voltage, operation, BUS, Ethernet and USB. |
17 | Preheater
Function: Prevents the heat exchanger from icing over at low outside air temperatures. |
