ER 60 GVZC EC - Characteristic curve
- Base load
- Nominal load
Dimensioned drawing
Technical data
Accessories / Spare parts
Product type | Name | Art. No. | Price*(EUR) | Action |
---|---|---|---|---|
Recessed-mounted housing | ER - UP/G | 0093.0995 | on request | |
Recessed-mounted housing | ER - UPD | 0093.0972 | on request | |
Recessed-mounted housing | ER - UPB | 0093.0968 | on request | |
Recessed-mounted housing | ER - UPB/R | 0093.0969 | on request | |
Recessed-mounted housing | ER - UPB/L | 0093.0970 | on request | |
Recessed-mounted housing | ER - UPB/U | 0093.0971 | on request | |
Air filter, replacement | ZF 60/100 | 0093.0331 | on request | |
Air filter, replacement | ZF 60/100 bulk container | 0093.0885 | on request | |
Masking frame | ER-AR | 0059.0899 | on request | |
Spacing frame | DR 60/100 | 0059.0928 | on request | |
Air filter, replacement | ZF 60/100 No longer available for delivery | 0093.0680 | on request |
Product type | Name | Art. No. | Price*(EUR) | Action |
---|---|---|---|---|
Cover | ABD ER 60/100/Centro | E059.1017.9001 | on request |
Product description
Productdescription
Wiring diagram
The fan permanently runs at least at base load. The base load level cannot be switched off manually. If the room lighting is switched on (S1 = On), the fan switches to nominal load after the preset start delay of 0 to three minutes.
After the room lighting is switched off, the fan continues running up to 15 minutes at an adjustable overrun time. Then the fan switches back to the base load level.
When the room is in use (S1=On), the fan switches automatically to full load after approx. 50 seconds. Base load operation can be switched off manually with switch S2.
The base load can be switched on and off with S2.
Case 1: Fan is stationary. If S2 is activated (S2 = On), the unit switches immediately to base load, without considering the preset start delay. If S2 is activated again, (S2 = Off), the unit switches immediately off, without considering the preset overrun time.
Case 2: The unit is running at base load level (S2 = On). If the room lighting is switched on (S1 = On), the fan switches to nominal load after an adjustable start delay of 0 to 3 minutes. After the room lighting is switched off, the fan continues running up to 15 minutes at the adjustable overrun time. Then the fan switches back to the base load level.
Case 3: Fan is stationary. If the room lighting is switched on (S1 = On), the fan switches to nominal load after an adjustable start delay of 0 to 3 minutes. After the room lighting is switched off, the fan continues running up to 15 minutes at the adjustable overrun time. Then the fan switches off.
When setting the overrun time, please take the General Building Approval into consideration.
Downloads / Videos
Predecessor - successor
On this website, technologies such as cookies and measurements of reach (targeting and tracking) are used (services). This means that personal information such as the IP address and browser information is processed to continuously improve our website as well as to display to you customised content that corresponds to your individual interests. You may of course influence the use of this information through the settings you choose. The settings you have chosen are stored in a necessary selection cookie. With the exception of the selection cookie mentioned above, technically non-essential cookies and measurements of reach are only used if you provide permission in advance by clicking “ACCEPT ALL AND CLOSE”. Details and options for customising your consent can be found under Data protection settings.
Here you can select a variety of different categories of services or cookies. By activating the corresponding “Statistics & analytics” checkbox and confirming “Save settings”, you can give your informed consent to the use of cookies for customisation purposes. At the bottom of the website under “Data protection settings”, you can change or revoke your consent and settings for the individual services at any time with effect for the future.
Necessary cookies are absolutely necessary for the operation of the website. Without these cookies, the website would not function properly.
These cookies and services collect and process data for statistics and analytics and thus enable further improvements of this website for users. Google Analytics and Google Adwords Conversion are used for this purpose. You will find a detailed description of such use in our Privacy Policy.