Settings
Operating modes, ventilation levels, indicators | |
| Operation with heat recovery (heat recovery unit): All ventilation units connected to the RLS, operate with heat recovery |
| Cross-ventilation mode without heat recovery: |
| Ventilation level indicators |
| Filter change indicator |
Setting operating mode | |
| : Press button, associated LED lights up. |
| : Push one of the two buttons, corresponding LED lights up. |
| : Press one of the two buttons, the LED at the bottom of the ventilation unit lights up: orange = heat recovery mode, blue = cross-ventilation operation. The LED flashes x times according to the ventilation level, e.g. level 5 = 5 times. |
Setting ventilation level | |
| : Press button, associated LED lights up. Ventilation level 0 only when the Off function is active (service menu). |
| , : Press button, associated LED lights up. |
, : | |||||
0 | 1 | 2 | 3 | 4 | 5 |
|
|
|
|
|
|
, : | |||||
|
| ||||
0 | 1 | 2 | 3 | 4 | 5 |
LED off | LED flashes | LED flashes | LED flashes | LED flashes | LED flashes |
(orange or blue)Switching on demand-driven operation (automatic dehumidification mode)
| |
| : Select ventilation level 3. Select another ventilation level to switch off. |
| : Press one of the two buttons for 2 seconds. Automatic symbol lights up. To switch off, press button again for 2 seconds. |
| : Press one of the two buttons for 2 seconds. At the bottom of the ventilation unit, the LED lights up for 5 seconds: orange = heat recovery mode, blue = cross-ventilation mode. To switch off, press button again for 2 seconds. |
Function only enabled with activated humidity sensor.
Switching on intermittent ventilation (level 5) | |
| , : Press the button for 2 seconds. The unit runs for 30 minutes at level 5, the corresponding LED lights up. Duration can be parametrised. |
Switching on sleep function (level 0) | |
| , : Press the button for 2 seconds. The unit turns off for 60 minutes (level 0), the corresponding LED lights up. Duration can be parametrised. |