1 | Service cover on left side
Function: To easily open and close the unit with a tool Left: Filter access; AU fan |
2 | Service cover in the middle
Function: To easily open and close the unit with a tool. Access to heat exchanger, condensate tank and heat register |
3 | Service cover on right side
Function: To easily open and close the unit with a tool
Right: STB heat register; outgoing air fan; condensate lift pump*, control circuit board. |
4 | RLS 1 WR control panel
Function: Control panel suited to the geniovent.x ventilation unit.
On/off, 4 levels, filter replacement and fault display. |
5 | External CO2 sensor (optional) or external VOC sensor (optional)
Function CO2 sensor (optional): Sensor for registering carbon dioxide CO2.
Function of VOC sensor (optional): Sensor for registering volatile organic compounds (VOCs). |
6 | Motion sensor (optional)
Function: for registering room occupancy. |
7 | Exhaust air filter, filter class ePM 10 60% (M5)
Function: Filters coarse dirt out of the exhaust air. |
8 | Electrical terminal box with control circuit board
Function: Central control unit of ventilation system. |
9 | Outgoing air fan
Function: Conveys the used air to the outside. |
10 | Bypass
Function: Used to bypass the heat exchanger. |
11 | Heat exchanger
Function: In the heat exchanger, heat is transferred between the exhaust air and supply air flows. |
12 | Outside air fan
Function: Conveys fresh air into the living area. |
13 | Outside air filter, filter class ePM1 55% (F7)
Function: Filters the finest contamination, e.g. pollen, out of the outside air. |
14 | Condensate tank with condensate lift pump*
Function: Condensate collects in the condensate tank and is pumped out by the condensate pump. |
15 | Preheater
Function: Prevents the heat exchanger from icing over at low outside air temperatures. |
16 | Smoke gas switch
Function: Switches the unit off when smoke is detected outside. |
17 | Outside air shutters, outgoing air shutters
Function: Close the unit when the fans stop and therefore prevent draughts. |
18 | Cable feedthrough
Function: Feedthroughs for external connections, e.g. voltage, operation, BUS. |
