Axial wall fan
DZQ 40/126 B
No longer available for deliveryManufacturer: MAICO
Axial wall fan with square wall plate, DN 400, three-phase AC, pole-changeable
Application examples: Production facility, Workshop, Garage, Building container, Storage facility
Product data sheet
Characteristic curve
Dimensioned drawing
DZQ 40/126 B - Dimensioned drawing [mm]
- Steel wall plate = EZQ/DZQ model
- Steel wall ring = EZS/DZS model
Technical data
DZQ 40/126 B - Technical data
Accessories
DZQ 40/126 B - Accessories
General accessories
Product description
Productdescription
DZQ 40/126 B
short description
Axial wall fan with square wall plate, DN 400, three-phase AC, pole-changeableProduct description
Brief description
- For surface mounting.
- Protective grille on the intake side, protection against accidental contact in accordance with DIN EN ISO 13857.
- 8-blade impellers made of glass fibre reinforced polyamide
- Thermal overload protection as a standard feature.
- Fans meet the requirements of the European Ecodesign Directive (EC) No.327/2011 Directive 2009/125/EC.
- Vibration-free running due to dynamically balanced impeller and motor (shaft-rotor), according to quality class 6.3, DIN ISO 1940, part 1.
- High efficiency on the ventilation side, low operating noise.
- Increased durability due to high-quality materials such as quiet ball bearings.
- Fans are maintenance-free.
- Installation for ventilation and air extraction possible in any position.
Air flow direction
- The air flow direction is marked.
- Standard exhaust air mode, air flow direction with air drawn across motor.
Motor
- Asynchronous motor.
- Speed controllable. Exception: types DZQ 40/2 B and DZS 40/2 B.
- Reversible. Exception: Fans with shaded-pole motors (...-E).
- Not suitable for ventilating steam-saturated air.
Three-phase AC motor
- DZQ/DZS type series.
- Asynchronous motor.
- Not suitable for ventilating steam-saturated air.
- Rated voltage 400 V, 50 Hz.
- IP 55 degree of protection. Exception for type DZQ ... D IP 54.
- Speed-controllable. Exception for type DZQ 40/2 B and DZS 40/2 B.
- Units can be switched in steps with an optional 5-step transformer.
- Reversible.
- Reversing mode: The volumetric flow is reduced by approx. 35 % with abnormal air flow direction.
- Thermal overload protection as a standard feature. Exception for type DZQ/DZS 25/4 D and pole-changeable axial duct fans, available on request.
- Potential-free terminal connections, which must be connected, e.g., to an MV 25-1 motor protection switch or the control circuit of a contactor.
- Pole-changeable fans: Ensure overload protection is guaranteed by a motor protection switch provided by the customer.
- Pole-changeable motors with speed ratios of 8/4 or 4/2 have a Dahlander pole-changing circuit.
Electrical connection
- On terminal block in end cover of the motor.
Safety information
- The fan may be operated only if the protection against accidental contact with the impeller is guaranteed to be in accordance with DIN EN ISO 13857, e.g., with Maico SG protective grille.
Special versions
- The following special versions are available on request, at an extra cost:
- Special voltages and frequencies.
- Single-phase motors with thermal contacts or PTC thermistor, potential-free terminal connection.
- Condensation drainage holes.
- Fans with enhanced anti-corrosion protection.
- Impellers made of aluminium.
- Information on operation at temperatures occasionally below -20°C available upon request.
- If operating with frequency converters, the factory must be consulted.
- Feasibility must be checked in each case.
Wiring diagram
DZQ 40/126 B - Wiring diagram
Downloads / Videos
DZQ 40/126 B - Downloads / Videos
Predecessor - successor
The wish list option allows you to make a note of all the products you are interested in.
You can change your wish list as often as you want to. You can change the quantity and item position of the products, go back
to the product page, download product data sheets, delete items and mark products as optional.
You can save your wish list to your computer and then call it up again at a later time to make more changes, if required.
Using the list, you can then download the tender text for all the products you have saved to the list, create an enquiry or
compare products.
On this website, technologies such as cookies and measurements of reach (targeting and tracking) are used (services). This means that personal information such as the IP address and browser information is processed to continuously improve our website as well as to display to you customised content that corresponds to your individual interests. You may of course influence the use of this information through the settings you choose. The settings you have chosen are stored in a necessary selection cookie. With the exception of the selection cookie mentioned above, technically non-essential cookies and measurements of reach are only used if you provide permission in advance by clicking “ACCEPT ALL AND CLOSE”. Details and options for customising your consent can be found under Data protection settings.
Here you can select a variety of different categories of services or cookies. By activating the corresponding “Statistics & analytics” checkbox and confirming “Save settings”, you can give your informed consent to the use of cookies for customisation purposes. At the bottom of the website under “Data protection settings”, you can change or revoke your consent and settings for the individual services at any time with effect for the future.
Necessary cookies are absolutely necessary for the operation of the website. Without these cookies, the website would not function properly.
These cookies and services collect and process data for statistics and analytics and thus enable further improvements of this website for users. Google Analytics and Google Adwords Conversion are used for this purpose. You will find a detailed description of such use in our Privacy Policy.