Hygrostat
HY 10 UP
No longer available for deliveryManufacturer: MAICO
Hygrostat for controlling ventilation systems depending on the relative air humidity, with fine adjustment... more information
Product data sheet
Characteristic curve
Dimensioned drawing
Technical data
HY 10 UP - Technical data
Accessories of
HY 10 UP - Accessories of
is a general accessory of
Product description
Productdescription
short description
Hygrostat for controlling ventilation systems depending on the relative air humidity, with fine adjustment range and standby mode, recess-mountedProduct description
- Hygrostat for controlling fans depending on the relative air humidity.
- Maximum current (when cos phi=1) 8 A or (when cos phi=0.6) 4A.
- Continuous setting range: 20 % to 95 % relative humidity.
- Fine adjustment in comfort range at 45 % to 65 % relative air humidity.
- Switching hysteresis: approx. 2 % relative humidity.
- To ensure that the connected fan does not run without interruptions, the hygrostat switches into standby mode after around 1 hour. Thus the fan is shut off for around 4 hours. If the setpoint has not been reached after 4 hours, the fan is switched back on again.
- To prevent the moisture setpoint from being changed by unauthorised persons in rented or public buildings, a fixed value control mechanism can be set on the underside of the unit. Then the setpoint is permanently set to 60 % relative air humidity regardless of the position of the knob on the front of the unit.
Installation instructions
- Install at height of around 1.5 m and away from direct sunlight, draughts and waste heat from electrical units and heaters.
- Do not fit in a unit with electrical devices which produce heat (e.g. dimmers).
- A hygroscopic base (e.g. gypsum plasterboards) can affect the control characteristics of the hygrostat. So fit on a moisture-neutral base (e.g. tiles).
Wiring diagram
HY 10 UP - Wiring diagram
Downloads / Videos
HY 10 UP - Downloads / Videos
On this website, technologies such as cookies and measurements of reach (targeting and tracking) are used (services). This means that personal information such as the IP address and browser information is processed to continuously improve our website as well as to display to you customised content that corresponds to your individual interests. You may of course influence the use of this information through the settings you choose. The settings you have chosen are stored in a necessary selection cookie. With the exception of the selection cookie mentioned above, technically non-essential cookies and measurements of reach are only used if you provide permission in advance by clicking “ACCEPT ALL AND CLOSE”. Details and options for customising your consent can be found under Data protection settings.
Here you can select a variety of different categories of services or cookies. By activating the corresponding “Statistics & analytics” checkbox and confirming “Save settings”, you can give your informed consent to the use of cookies for customisation purposes. At the bottom of the website under “Data protection settings”, you can change or revoke your consent and settings for the individual services at any time with effect for the future.
Necessary cookies are absolutely necessary for the operation of the website. Without these cookies, the website would not function properly.
These cookies and services collect and process data for statistics and analytics and thus enable further improvements of this website for users. Google Analytics and Google Adwords Conversion are used for this purpose. You will find a detailed description of such use in our Privacy Policy.