Cellar dehumidification control
AKE/1
New developmentManufacturer: MAICO
AKE/1 control system incl. 2 AKE FFT humidity and temperature sensors (4m cable, can be extended on site to... more information
Application examples: Cellar, Garage, Larder, Storage room
Product data sheet
Characteristic curve
Dimensioned drawing
AKE/1 - Dimensioned drawing [mm]
Technical data
AKE/1 - Technical data
Accessories of
AKE/1 - Accessories of
is a general accessory of
Product description
Productdescription
short description
AKE/1 control system incl. 2 AKE FFT humidity and temperature sensors (4m cable, can be extended on site to max. 30m) for fully automatic cellar dehumidification in conjunction with various fansProduct description
Features
- Fully automatic, intelligent cellar dehumidification control for the highest demands.
- Constant comparison of the absolute humidity in the indoor and outdoor areas: Connected fans ventilate automatically if the absolute humidity in the room is greater than outside.
- No maintenance and manual control required: Install once and the system works automatically.
- Operation of fans up to a total of 600 W and 3 A (supply and exhaust air fan).
- For the use of fans > 600 W and 3A as well as three-phase AC fans, a circuit breaker must be installed between the control and the fan.
- Barrier-free product as the fan switches itself on and off automatically without additional switches.
- Control monitors the room humidity via integrated humidity-temperature sensors.
- Frost protection function: Switch off the system at inside temperatures below 5 °C.
- Additional manual operation for 30 min. can be switched on and off again using the button on the control.
- Additional installation of switch for unit not needed.
- Additional manual operation possible with external button or switch.
- Automatic button/switch detection.
- Status and function displayed using LEDs.
- Compact dimensions: Control system 160 x 110 x 90 mm, outdoor sensor Ø50 mm, height 13 mm.
- Scope of delivery: Control system, 2 sensors with 4 m cable length each.
- Sensor cable can be extended on site with LIYY 4x0.25 mm² cable.
- Housing made of impact-resistant plastic.
- IP protection: IP40 control / IP54 outdoor sensor.
- Frost protection: To prevent the room from cooling down, the AKE has a frost protection function. In this case, the connected fan(s) switch(es) off automatically at indoor temperatures of less than 5 °C.
- Garage dehumidification: optional deactivation of the frost protection function for unheated rooms.
- Suitable for continuous operation.
Installation instructions
- Simple installation: wall installation.
- Electrical connection: Surface-mounted.
Wiring diagram
AKE/1 - Wiring diagram
EA – Exhaust air
SA – Supply air
OUT – Output
OSA – Outer
IN – Inside
Downloads / Videos
AKE/1 - Downloads / Videos
Predecessor - successor
AKE/1 - Predecessor
| Product type | Name | Art. No. | Action |
|---|---|---|---|
| Cellar dehumidification control | AKE | 0157.0129 |
On this website, technologies such as cookies and measurements of reach (targeting and tracking) are used (services). This means that personal information such as the IP address and browser information is processed to continuously improve our website as well as to display to you customised content that corresponds to your individual interests. You may of course influence the use of this information through the settings you choose. The settings you have chosen are stored in a necessary selection cookie. With the exception of the selection cookie mentioned above, technically non-essential cookies and measurements of reach are only used if you provide permission in advance by clicking “ACCEPT ALL AND CLOSE”. Details and options for customising your consent can be found under Data protection settings.
Here you can select a variety of different categories of services or cookies. By activating the corresponding “Statistics & analytics” checkbox and confirming “Save settings”, you can give your informed consent to the use of cookies for customisation purposes. At the bottom of the website under “Data protection settings”, you can change or revoke your consent and settings for the individual services at any time with effect for the future.
Necessary cookies are absolutely necessary for the operation of the website. Without these cookies, the website would not function properly.
These cookies and services collect and process data for statistics and analytics and thus enable further improvements of this website for users. Google Analytics and Google Adwords Conversion are used for this purpose. You will find a detailed description of such use in our Privacy Policy.