short description

Product description

Bypass model

• Central unit with enthalpy heat exchanger and integrated bypass shutter that is steplessly demand-driven. Depending on the temperature difference and user settings, the room air is optimally cooled without draughts.
• Expandable via optional additional circuit board ZP 1 for the control of an air shutter of a zone control, for example.

Brief description

• Intelligent ventilation unit with heat and humidity recovery for controlled ventilation and air extraction with an air volume of 40 to 160 m³/h.
• Two supply air sockets (left and right) and one exhaust air socket (centre) allow the supply air lines to be routed without crossing.
• Complete separation of exhaust air/supply air ducts throughout the unit. This prevents unwanted recirculation of air. Viruses (e.g. Corona virus) and bacteria are therefore not transmitted. Hygiene certificate according to VDI 6022, sheet 1 available.
• Compact and highly efficient – energy efficiency class A. Sound and energy-optimised fans in EC technology.
• KfW and NRW subsidies are available.
• Especially suitable for modern new buildings or redevelopments.
• Mounting options: suspended from the ceiling, installed in/on a wall or in a sloped roof.
• No pressure fluctuation sensitivity: The integrated/automatic constant volumetric flow control ensures permanent compliance with the set volumetric flow under all operating conditions (e.g. filter contamination, air valve settings). This also results in easier commissioning/air volume measurement at the valves. The volumetric flows do not require any adjustment.
• Very quiet unit with extremely low installation height (23 cm): This makes it particularly suitable for installation in suspended ceilings. In addition, also suitable for installation in a sloped roof.
• Various operating modes: Off, Manual, Auto Sensor, ECO exhaust air, ECO supply air.
• RLS 1 WR room air control system included in the scope of delivery.
• ISO Coarse 80 % (G4) filter in the exhaust air and ISO ePM1 55 % (F7) pollen filter in the outside air. A filter cascade (ISO Coarse 80 % / ISO ePM1 55 %) in the outside air is possible to increase the filter service life.
• The ventilation unit is equipped with a state-of-the-art enthalpy heat exchanger with hygiene certificate according to VDI 6022, sheet 1.
• The WS 160 Flat can be controlled via the APP (air@home) and the browser-based web tool (www.air-home.de) using an integrated LAN interface.
• Plug & Play: Easy commissioning thanks to free commissioning software and standard USB connection for commissioning, control system update and service.
• Combination sensor (humidity/temperature) integrated as standard in the exhaust air enables demand-driven ventilation operation as well as an intelligent dehumidification strategy (excess humidity protection). Furthermore, the unit is characterized by a frost protection strategy adapted to the real demand.
• The heat recovery unit has a multifunction contact for the control of, e.g., brine earth heat exchanger (unregulated pump), operation and fault display, pre-heating or supplementary heat register, external shutters or cooling.
• Two input contacts (12 V and 230 V) are available for, e.g., safety shutdown.
• Various inputs/outputs enable a control connection to other building service installations, e.g., the heat pump.
• Integrated MODBUS interface (TCP/IP and RTU) enables integration in the building control system.
• The optional K-SM plug-in module enables integration into KNX building control systems.
• The optional E-SM plug-in module enables integration into EnOcean systems.
• Optional additional circuit boards ZP 1 and ZP 2 for expansion functions such as “pressure constancy control” of the EC fans, zone shutter, brine earth heat exchanger (regulated pump), filter differential pressure measurement.
• Maximum unit flexibility thanks to a wide range of equipment/connection options.
• Modern unit module technology enables a high degree of user-friendliness for service and maintenance.

Housing

• Powder-coated sheet steel housing.
• Simple filter change is possible without tools.
• Tight, thermal bridge-free, and sound-insulated inner housing made of temperature-resistant, sound-absorbing and heat-insulating EPP material.
• EPP housing with very good hygienic/non-hygroscopic properties.
• Unit surface and unit’s inner housing are easy to clean.

Filter:

• ISO Coarse 80 % (G4) filter in the exhaust air and ISO ePM1 55 % (F7) pollen filter in the outside air.
• Filter change without tools.

Operation

• Ready for service with on/off switch.
• RLS 1 WR control panel included in the scope of delivery, 4 air levels, filter change indicator, fault display.
• Other control panels can be connected in parallel.
• Mobile operation via APP (air@home) or browser-based web tool (www.air-home.de) via smartphone, laptop or PC enables, e.g.,
• live reporting, user management
• Demand-driven automatic operation / time-controlled automatic operation
• Manual operation / OFF
• ECO mode supply air or ECO mode exhaust air
• Filter queries, error messages
• Optional RLS T2 WS touchscreen control panel for the setting of:
• 2 automatic operating modes (Auto Sensor / Auto Time)
• 4 manual operating modes (ECO exhaust air / ECO supply air / MANUAL / OFF)
• complete commissioning of the Trio LZ possible
• Optional RLS G1 WS design control panel:
• ON/OFF
• 5 levels
• Automatic operation
• ECO supply air, ECO exhaust air
• Filter change and fault display
• USB connection for service/commissioning – free MAICO commissioning software.
• Network integration via integrated LAN interface.
• Smart-Home ready (e.g. Loxone via Modbus TCP/IP).
• Modbus TCP/IP and RTU integrated as a standard feature.
• Optional KNX plug-in module K-SM for integration into building control system, www.knx.org.
• Optional EnOcean plug-in module E-SM for integrating the unit into the “EnOcean world”, www.enocean-alliance.org.

Control system

• Standard demand-driven volumetric flow regulation (“decisive humidity value”).
• Continuously variable demand-driven adaptation of air volumes.
• Integrated excess humidity protection function.
• 3 temperature sensors in outside, outgoing and supply air.
• 1 combination sensor (temperature and humidity) in exhaust air socket.
• Up to four external sensors of different types (CO2, VOC, humidity) can be connected.
• Multifunction contact for the control of e.g. brine earth heat exchanger (unregulated pump), operation and fault display, preheating or supplementary heat register, external shutters or cooling.
• Inputs for safety shutdown via 12V contact or 230V contact (e.g. smoke detector, fire alarm, differential pressureless fireplace).
• Additional pushbutton input for triggering time-limited intensive ventilation (intermittent ventilation).
• Expandable via optional additional circuit board ZP 1 for the control of:
• 3-way shutter (e.g. earth-air heat exchanger)
• a regulated pump (e.g. brine earth heat exchanger)
• Switching contact use for external supplementary heat register
• Expandable via optional circuit board ZP 2 for:
• Pressure constancy of the EC fans
• Differential pressure controlled filter monitoring
• Various inputs and outputs enable a control connection of the ventilation unit with another service installation, such as a heat pump.

Approvals and certificates

• DiBt approval.
• PHI certificate.
• Test report in accordance with DIN EN 13141-7.
• Certificate according to Swiss “energie-cluster.ch”.
• Hygiene certificates for housing material (EPP) and heat exchanger.

Heat exchanger/heat recovery

• Highly efficient enthalpy cross-counterflow heat exchanger.
• Heat recovery up to 84 % and humidity recovery up to 53 %.
• Hygiene certificate (no bacteria, virus growth/virus transfer) according to VDI 6022, sheet 1.
• Heat exchanger can be cleaned with water, antimicrobial.
• No condensation connection required.

Bypass

• The integrated bypass shutter (100 % bypass) with needs-based bypass control makes a continuously variable bypass control possible.
• Depending on temperature differences and user settings the room air can be cooled in an optimum manner without draughts.

Frost protection

• Prevention of heat exchanger freezing at low temperatures by monitoring the outgoing air temperature.
• If there is a risk of frost, the outside air volumetric flow rate is gradually reduced.

Fans

• Forward curved centrifugal fans in the outgoing air or outside air.
• Energy-efficient EC direct current motors with integrated volumetric flow consistency control.
• Possibility of pressure consistency control via the optional additional circuit board ZP 2.
• 4 ventilation levels from 40 m³ to 160 m³, can be adjusted continuously.

Installation information

• Easy, very time-saving installation by screwing the unit directly to the ceiling/wall.
• Housing cover is easy to remove via screws.