Language
Deutsch
English
Français
Home
Installation, Commissioning and Maintenance Instructions for WR 310/410, WS 320/470
Instructions, software, links
Safety
Scope of delivery
Intended use
Unit overview
Unit types
Unit front
Structure / duct connections
Control units, software, interfaces
Authorizations for parameter settings with the following control units/tools
RLS 1 WR control unit (scope of delivery)
RLS T2 WS touchscreen control unit
RLS G1 WS design control unit
Further operating and setting options for users and specialist installers
RLS 1 WR operating modes with single control unit (Solo)
Functions RLS 1 WR and EnOcean button in combination with RLS T1 WS, RLS T2 WS or RLS G1 WS
Additional circuit boards, switching contacts, sensors, plug-in modules, interfaces
Technical data
Transport
Installation location, operating conditions
Installation of ventilation unit, electrical connection
Mounting the ventilation unit on the wall
Condensate drain
Air ducts/insulation
Electrical connection
Installation of the RLS 1 WR control unit
Installation of the RLS T2 WS control unit
Retrofitting the RLS T2 WS control unit
Replacing RLS T2 WS
RLS 1 WR: Control elements, LEDs
RLS T2 WS: Control elements, displays, functions
Standard display/start screen
Main menu value call-up
Operating mode selection
Ventilation level short code
Commissioning
Commissioning software
USB connection: Connecting PC/notebook to the ventilation unit
System settings menu
Operating structure for system settings
Display
Time programme
System
Installer
Software version
Error memory
Information
Unit settings menu
Operating structure for unit settings
Basic settings
RLS 1 WR interlock
Room sensor configuration
Single control unit: RLS 1 WR control unit
Single control unit: Blocking OFF
Switching contact function
Bypass
Preheating register
Heat exchanger type
Acknowledgement of external safety device
Factory setting for control
Ventilation settings
Volumetric flow measurement (nominal ventilation)
Volumetric flow per ventilation level
EA/SA (exhaust air/supply air) adjustment
Night-time cooling / flush mode
Amount of air for volumetric flow compensation (Eco supply air)
Unit filter
External filter
Room filter
Duration of ventilation level
Motion detector overrun time
Ventilation time programme
Temperature settings
Room temperature adjustment
T supply air min. cooling
Maximum room temperature
Room setpoint temperature
Sensor settings
Combi sensor operation
Combi sensor humidity adjustment / Combi sensor temperature adjustment
Configuration of sensor 1 / sensor 2
Configuration of sensor 3 / sensor 4
CO2-/VOC-/Rel. Humidity limit value min./max.
CO2 value / VOC value / Rel. humidity Control voltage 0 V/10 V
Fireplace (ZP)
Brine earth heat exchanger (ZP 1, HP switching contact)
Zone ventilation (ZP1)
3-way air shutter (ZP 1)
Supplementary heating (ZP 1, HP switching contact)
Pressure consistency (ZP 2)
Filter monitoring (ZP 2)
EnOcean wireless (E-SM plug-in module)
KNX (plug-in module K-SM)
BACnet
Switching test
Internet
Main menu value call-up
Operating structure for call-up
Ventilation
Temperatures
Sensors
Switching statuses (outputs)
Operating hours
Internet
EnOcean wireless
Fault messages
Information
Special functions
Excess humidity protection
Special excess humidity protection function for KBET variants
Auto Sensor operation
Bypass
Frost protection strategies
Ventilation units without preheating register
Units with preheating register and sensitive heat exchanger
Ventilation units with preheating register, sensitive heat exchanger and additional pre-heating
Units with preheating register and enthalpy heat exchanger
Switching contact (potential-free)
Contact for external safety device
Switching test
Operation via app / web tool
Factory settings
Functions of additional circuit board ZP 1
Brine earth heat exchanger control
Zone ventilation
Air earth heat exchanger 3-way air shutter
Supplementary heating control
Functions of additional circuit board ZP2
Pressure constants for controlling the fans
Filter monitoring with pressure measuring sensor
EnOcean/KNX plug-in modules
Cleaning/maintenance
Changing air filters
Cleaning the condensate drain and siphon
Cleaning heat exchanger and unit inside
Fault rectification
Safety shutdown
Fault LEDs on the main board
Fault messages
Causes for sensor errors
Information
Dismantling, environmentally-sound disposal
Acknowledgements
Spare parts WR 310/410 and WS 320/470 (left-hand version)
Spare parts WR 310/410 and WS 320/470 (right-hand version)
Circuit diagrams, wiring diagrams
1) WR 310/410, WS 320/470
2) WR 310/410, WS 320/470
3) WR 310/410, WS 320/470
4) WR 310/410, WS 320/470
Product data sheets
Product data sheet for WR 310 ..., WS 320 ...
Product data sheet for WS 320 ...
Product data sheet for WR 410 ..., WS 470 ...
Product data sheet for WS 470 ...